LINK/V2 (CN) LINK STLINK STM8 STM32 downloader

1. Supports a full range of STM32 SWD interface debugging, the 4-wire interface is simple (including power supply), fast, and stable; the interface definition shell is directly marked! No need to read the instructions!
2. Support the full range of STM8 SWIMDownload and debug (common development environments such as IAR, STVD, etc. are supported); the supported software versions are as follows:
ST-LINK Utility 2.0 and above STVD 4.2.1 and above
STVP 3.2.3 and above IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above KEIL RVMDK V4.21 and above
3. Support automatic firmware upgrade to ensure the follow-up support of ST products. The firmware has been upgraded to the latest V2.J17.S4 when leaving the factory;
4. Increase the 5V power output, and the output I/O ports are protected, so you are not afraid of damage to ST-LINK V2 caused by operating errors!
5. The interface uses pure copper gold-plated 2.54 pitch simple horn socket, with 20CM DuPont line, which can deal with different target board line sequences and flexible wiring;
6. Use U disk aluminum alloy shell to protect the motherboard, easy to carry, not afraid of static electricity, not afraid of falling and touching.
7. Attached information package, the information includes:(Electronic file)
1. STLINK / V2 driver;
2. KEIL MDK (4.60) development environment (and other commonly used development environments)
3. IAR STM8 (1401) development environment (and other commonly used development environments)
4. STVD STM8 development environment (and other commonly used development environments)
5. Some classic STM32 materials (including a large number of example source codes and video tutorials)
6. Some classic STM8 materials (including a large number of example source codes and learning experience)